| [105] Hyunseung Ryu, Jeonghoon Yoo |
Multi-objective topological design considering functionally graded materials and coated fiber reinforcement. |
Finite Elements in Analysis and Design, Vol. 242
, Article 104269, 2024. |
| [104] Minkyu Oh, Jeonghoon Yoo |
Topological optimal design of composite magnetic actuators to improve driving force and thermal conductivity. |
Structural and Multidisciplinary Optimization, Vol. 67, Article 129, 2024. |
| [103] Sunghan Lee, Minkyu Oh, Cheolwoong Kim, Mingook Jung, Jeonghoon Yoo |
Multi-scale design of composite material structures for maximizing fundamental natural frequency. |
Computer Methods in Applied Mechanics and Engineering, Vol. 425, Article 116928, 2024. |
| [102] Minkyu Oh, Jeonghoon Yoo |
Functionally graded structure design for magnetic field applications. |
Computer Methods in Applied Mechanics and Engineering, Vol. 411, Article 116057, 2023. |
| [101] Kyungtae Min, Minkyu Oh, Cheolwoong Kim, Jeonghoon Yoo |
Topological design of thermal conductors using functionally graded materials. |
Finite Elements in Analysis and Design, Vol. 220, No.1, Article 103947, 2023. |
| [100] Mingook Jung, Sung Han lee, Jeonghoon Yoo |
Bi-objective topology optimization for direct current concentration and heat flux cloaking using adaptive weighting method. |
Structural and Multidisciplinary Optimization, Vol. 65, No.3, Article 292, 2022. |
| [99] Hyeon Jin Park, Min Kyu Oh, Soonok Park, Jeonghoon Yoo |
Structural design methodology for lightweight supporting structure of a multi-rotor wind turbine. |
Wind and Structures, Vol. 34, No.3, pp. 291-301, 2022. |
| [98] Min Kyu Oh, Dok Soo Lee, Jeonghoon Yoo |
Stress Constrained Topology Optimization Simultaneously Considering the Uncertainty of Load Positions. |
International Journal for Numerical Methods in Engineering, Vol. 123, Issue.2, pp. 339-365, 2021. |
| [97] Cheolwoong Kim, Jaewook Lee, Jeonghoon Yoo |
Machine learning-combined topology optimization for functionary graded composite structure design. |
Computer Methods in Applied Mechanics and Engineering, Vol. 387, Article 114158, 2021. |
| [96] Mingook Jung, Minkyu Oh, Jeonghoon Yoo |
Reaction-diffusion equation-based topology optimization code for electromagnetic wave problems using FreeFEM++. |
Structural and Multidisciplinary Optimization, Vol. 64, Issue. 6, pp. 4367-4385, 2021. |
| [95] Mingook Jung, Jeonghoon Yoo, |
Phase field-based topology optimization of metallic structures for microwave applications using adaptive mesh refinement. |
Structural and Multidisciplinary Optimization, Vol. 63, pp. 2685-2704, 2021. |
| [94] Mingook Jung, Namjoon Heo, Jinwoo Park, Jeonghoon Yoo |
Multi-directional cloaking structure design using topology optimization. |
Journal of Electromagnetic Waves and Applications, Vol. 35, No. 8, pp. 1008-1019, 2021. |
| [93] Jaewook Lee, Chiyoung Kwon, Jeonghoon Yoo, Seungjae Min, Tsuyoshi Nomura, Ercan M. Dede |
Design of spatially-varying orthotropic infill structures using multiscale topology optimization and explicit de-homogenization. |
Additive Manufacturing, Vol. 40, Article 101920, 2021. |
| [92] Jaejoon Lee, Jaewook Lee, Taehoon Jung, Jeonghoon Yoo |
Topology optimization for three-dimensional design of segmented permanent magnet arrays. |
Structural and Multidisciplinary Optimization, Vol. 62, pp. 3089-3104, 2020. |
| [91] Dongjin Kim, Jaewook Lee, Tsuyoshi Nomura, Ercan M. Dede, Jeonghoon Yoo, Seungjae Min |
Topology optimization of functionally graded anisotropic composite structures using homogenization design method. |
Computer Methods in Applied Mechanics and Engineering, Vol. 369, Article 113220, 2020. |
| [90] Wontaek Lee, Mingook Jung, Tae-Hyung Kim, Jong-Gwan Yook, Jeonghoon Yoo |
Patch antenna design using the gA and the binary method for dual-band applications. |
Journal of Electromagnetic Waves and Applications, Vol. 34, No. 12, pp. 1691-1704, 2020. |
| [89] Cheolwoong Kim, Hong Kyoung Seong, Il Yong Kim, Jeonghoon Yoo |
Single variable-based multi-material structural optimization considering interface behavior. |
Computer Methods in Applied Mechanics and Engineering, Vol. 367, Article 113114, 2020. |
| [88] Cheolwoong Kim, Mingook Jung, Takayuki Yamada, Shinji Nishiwaki, Jeonghoon Yoo |
FreeFEM++ code for reaction-diffusion equations based topology optimization: For high-resolution boundary representation using adaptive mesh refinement. |
Structural and Multidisciplinary Optimization, 62(1), 439-455, 2020. |
| [87] Cheol Woong Kim, Hong Kyoung Seong, Jeonghoon Yoo |
Study on the Clear Boundary Determination from Results of the Phase Field Design Method. |
International Journal of Precision Engineering and Manufacturing, Vol.20, No. 9, pp. 1553-1561, 2019. |
| [86] Jaewook Lee,Jeonghoon Yoo,Seungjae Min,Minho Yoon |
Topology optimization of anisotropic magnetic composites in actuators using homogenization design method. |
Structural and Multidisciplinary Optimization, Vol. 60, pp. 1423-1436, 2019. |
| [85] Seunghwan Jeong,Hong Kyoung Seong,Cheol Woong Kim,Jeonghoon Yoo |
Structural design considering the uncertainty of load positions using the phase field design method. |
Finite Elements in Analysis and Design, Vol.161, pp. 1-15, 2019. |
| [84] Doksoo Lee,Hong Kyoung Seong,Jinwoo Park,Jeonghoon Yoo |
Design of Broadband Dielectric Collimators With the Phase-Field Design Method for Applications in the X-Band Range. |
IEEE Antennas and Wireless Propagation Letters, Vol.18, No.6, pp. 1258-1262, 2019. |
| [83] Mingook Jung,Hyundo Shin,Jinwoo Park,Jeonghoon Yoo |
Structural design to control the microwave reflection path in broadband frequency using a dielectric material. |
IEEE Antennas and Wireless Propagation Letters, Vol.18, No. 4, pp. 801-805, 2019. |
| [82] Hong Kyoung Seong,Cheol Woong Kim,Jeonghoon Yoo,Jaewook Lee |
Multi-phase topology optimization with a single variable using the phase field design method. |
International Journal for Numerical Methods in Engineering, Vol.119, No. 5, pp. 334-360, 2019. |
| [81] Jaewook Lee,Dongjin Kim,Tsuyoshi Nomura,Ercan Dede,Jeonghoon Yoo |
Topology optimization for continuous and discrete orientation design of functionally graded fiber-reinforced composite structures. |
Composite Structures, Vol. 201, pp. 217-233, 2018. |
| [80] Joohyun Go,Hong Kyoung Seong,Jinwoo Park,Jeonghoon Yoo |
Design of microwave collimators for beam splitting and focusing using dual dielectrics. |
IEEE Antennas and Wireless Propagation Letters, Vol. 17, No. 9, pp. 1669-1672, 2018. |
| [79] Hyundo Shin,Jeonghoon Yoo |
Magnetic resonator design for wireless power transfer using a mathematical design approach. |
International Journal of Precision Engineering and Manufacturing, Vol. 19, No. 9, pp. 1345-1351, 2018. |
| [78] Hong Kyoung Seong,Jeonghoon Yoo |
Systematic design of a grating structure to induce the surface plasmon resonance at a target wavelength. |
IEEE Transactions on Magnetics, Vol. 54, No. 3, pp. 8000104, 2018. |
| [77] Hyundo Shin,Jeonghoon Yoo |
Topological metallic structure design for microwave applications using a modified interpolation scheme. |
Structural and Multidisciplinary Optimization, Vol. 57, No. 3, pp. 1021-1045, 2018. |
| [76] Hong Kyoung Seong,Hyundo Shin,Jeonghoon Yoo, Takayuki Yamada,Shinji Nishiwaki |
Reaction-diffusion equation based topology optimization combined with the modified conjugate gradient method. |
Finite Elements in Analysis and Design 140:84-95, 2018. |
| [75] Hong Kyoung Seong, Jeonghoon Yoo |
Systematic Design of a Grating Structure to Induce the SurfacePlasmon Resonance at a Target Wavelength. |
IEEE Transactions on Magnetics, 2018. |
| [74] Hyundo Shin, Jeonghoon Yoo |
Tunable waveguide bandpass filter design using a sequential design process. |
International Journal of Precision Engineering and Manufacturing 18(6):845-852, 2017. |
| [73] Hyundo Shin, Jeonghoon Yoo |
Topological metallic structure design for microwave applications using a modified interpolation scheme. |
Structural and Multidisciplinary Optimization:1-25, 2017. |
| [72] Hong Kyoung Seong, Jeonghoon Yoo |
Probability distribution function inspired structural optimization for frequency response problems. |
Computer Methods in Applied Mechanics and Engineering 318:783-802, 2017. |
| [71] Hyundo Shin,Namjun Heo,Jinwoo Park,Ilsung Seo, Jeonghoon Yoo |
All-dielectric structure development for electromagnetic wave shielding using a systematic design approach. |
Applied Physics Letters 110:21908, 2017. |
| [70] Hanmin Kim,Jinwoo Park,Ilsung Seo, Jeonghoon Yoo |
Two-dimensional dielectric collimator design and its experimental verification for microwave beam focusing. |
Applied Physics Letters 109(15):151902, 2016. |
| [69] Kangwon Lee,Kisoo Ahn, Jeonghoon Yoo |
A novel P-norm correction method for lightweight topology optimization under maximum stress constraints. |
Computers & Structures 171:18-30, 2016. |
| [68] H. K. Seong, Jeonghoon Yoo |
Topological design of the film-coupled nanoparticle for the field intensity enhancement over the broadband visible spectrum. |
Applied Physics Letters 108(20):201904, 2016. |
| [67] Hak-Yong Lee,Hong Kyoung Seong, Jeonghoon Yoo |
Optimal shape design of the film-coupled nanoparticle using the phase field design method. |
International Journal of Precision Engineering and Manufacturing 17(4):453-460, 2016. |
| [66] Jeonghoon Yoo |
Dielectric structure design for microwave cloaking considering material properties. |
Journal of Applied Physics 119(1):014102, 2016. |
| [65] Byung Jin Son,Jeonghoon Yoo, Minhyung Lee |
Optimal design of a composite space shield based on numerical simulations. |
Journal of Mechanical Science and Technology 29(12):5299-5308, 2015. |
| [64] Hansol Kim,Cheolwoong Kim,Hong Kyoung Seong, Jeonghoon Yoo |
Structural Optimization of a Magnetic Actuator With Simultaneous Consideration of Thermal and Magnetic Performances. |
IEEE Transactions on Magnetics 51(12):1-1, 2015. |
| [63] Gumin Kang,Jeonghoon Yoo,Joonmo Ahn, Kyoungsik Kim |
Transparent dielectric nanostructures for efficient light management in optoelectronic applications. |
Nano Today 10(1), 2015. |
| [62] Heeseung Lim,Dongheok Shin,Kyoungsik Kim, Jeonghoon Yoo |
Electromagnetic band-gap structure design using the auxetic unit-structure for easily controllable tunability. |
Journal of Applied Physics 116(24):243506, 2014. |
| [61] Jinsoo Kim,Min Jun Kim,Jeonghoon Yoo, Seung-Jong Kim |
Novel Motion Modes for 2-D Locomotion of a Microrobot. |
IEEE Transactions on Magnetics 50(11):1-5, 2014. |
| [60] Cesar Yukishigue Kiyono,Paulo Henrique Nakasone,Jeonghoon Yoo,Luis Augusto Motta Mello, Emilio Carlos Nelli Silva |
On the optimization of HDD arms with piezoelectric actuation. |
Finite Elements in Analysis and Design 88:118?127, 2014. |
| [59] Chan Park,Jinsoo Kim,Seung-Jong Kim, Jeonghoon Yoo |
Development of a permanent magnet type micro-robot actuated by external electromagnetic system. |
Microsystem Technologies 21(6), 2014. |
| [58] Soohwan Byun,Hak Yong Lee, Jeonghoon Yoo |
Systematic approach of nanoparticle design to enhance the broadband plasmonic scattering effect. |
Journal of Applied Physics 115(18):184302-184302-6, 2014. |
| [57] Jaeyeol Lee,Jeonghoon Yoo, Kyunghoon Lee |
Numerical simulation of the nano-second pulsed laser ablation process based on the finite element thermal analysis. |
Journal of Mechanical Science and Technology 28(5):1797-1802, 2014. |
| [56] Jae Seok Choi,Takayuki Yamada,Kazuhiro Izui,Shinji Nishiwaki,Heeseung Lim, Jeonghoon Yoo |
Optimal shape design of flux barriers in IPM synchronous motors using the phase field method. |
COMPEL International Journal of Computations and Mathematics in Electrical 33(3), 2014. |
| [55] Dongyeal Lim,Dongheok Shin,Hyundo Shin, Jeonghoon Yoo |
A systematic approach to enhance off-axis directional electromagnetic wave by two-dimensional structure design. |
Optics Express 22(6):6511-8, 2014. |
| [54] Dongyeal Lim,Heeseung Lim,Jae Seok Choi, Jeonghoon Yoo |
Waveguide Design at Infrared Wavelength With Asymmetric Dielectric Surface Gratings. |
IEEE Transactions on Magnetics 50(2):721-724, 2014. |
| [53] Heeseung Lim,Jeonghoon Yoo, Jae Seok Choi |
Topological nano-aperture configuration by structural optimization based on the phase field method. |
Structural and Multidisciplinary Optimization 49(2), 2014. |
| [52] Namjoon Heo,Jaeyeol Lee,Hyundo Shin,Jeonghoon Yoo, Daekeun Kim |
Inverse design of the absorbing layer for detection enhancement in near-infrared range. |
Optics Express 21(20):23220-23230, 2013. |
| [51] Hyundo Shin, Jeonghoon Yoo |
Topological Design Approach for Quadruple-Ridge Aperture Configuration. |
IEEE Photonics Technology Letters 25(16):1547-1550, 2013. |
| [50] Namjoon Heo, Hyun-Jun Soh, Jeonghoon Yoo |
Reflector Texturing Design of a Thin Film Solar Cell in a Specific Wavelength Range Using Topology Optimization. |
IEEE Transactions on Magnetics 49(5):2113-2116, 2013. |
| [49] Jeonghoon Yoo |
Designing an optimal absorbing layer for thin-film solar cells. |
SPIENewsroom, 2012. |
| [48] Soonok Park, Jeonghoon Yoo |
Structural optimization of a multi-physics problem considering thermal and magnetic effects. |
IEEE Transactions on Magnetics, 2012. |
| [47] Hyun-Jun Soh, Jeonghoon Yoo, Daekeun Kim |
Optimal design of the light absorbig layer in thin film silicon solar cells. |
Solar Energy, Vol. 86, Issue 7, pp. 2095-2105, 2012. |
| [46] Younghoom Kim, Jeonghoon Yoo, Minhyung Lee |
Optimal design of spaced plates under hypervelocity impact. |
Journal of Mechanical Science and Technology, Vol. 26, No. 5, pp. 1567-1575, 2012. |
| [45] Hyun-Jun Soh, Jeonghoon Yoo |
Texturing Design for a Light Trapping System Using Topology Optimization. |
IEEE Transactions on Magnetics, Vol. 48, No. 2, pp. 227-239, 2012. |
| [44] Jeonghoon Yoo, Jaeyeob Jung Hyeoksoo Hong |
Optimal Shape Design of Magnetic Actuators for Magnetic and Dynamic Characteristic Improvement. |
Journal of Magnetics, Vol. 16, No. 3, pp. 268-270, 2011 . |
| [43] Sung-Whan Lee, Jeonghoon Yoo, Sungsoo Rhim |
Speed Control and Magnetic Analysis of Crawling Robot with Magnetic Binder. |
International Journal of Applied Electromagnetics and Mechanics, Vol. 36, pp. 191-205, 2011 |
| [42] Hyung-Jin Kim, Jeonghoon Yoo, Jun-Uk Chu, Sung-Min Han, Kui-Won Coi, In-Chan Youn |
Study of Optimized Hip Implant Development for Hip Implant total Hip Replacement. |
International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 4, pp. 719-729, 2011. |
| [41] Hyeoksoo Hong, Jeonghoon Yoo |
Shape Design of the Surface Mounted Permanent Magnet in a Synchronous Machine. |
IEEE Transactions on Magnetics, Vol. 47, No. 8, pp. 2109-2117, 2011. |
| [40] Hee Seung Lim, Jeonghoon Yoo |
FEM based Simulation of the Pulsed Laser Ablation Process in Nanosecond Fields. |
Journal of Mechanical Science and Technology, Vol. 25, No. 7, pp. 1811-1816, 2011. |
| [39] Jae Seok Choi, Jeonghoon Yoo, Shinji Nishiwaki, Takayuki Yamada, Kazuhiro Izui |
Topology Optimization Using a Reaction-Diffusion Equation. |
Computer Methods in Applied Mechanics and Engineering, Vol. 200, Issues 29-32, pp. 2407-2420, 2011 |
| [38] Hyun-Jun Soh, Jeonghoon Yoo |
Improved surface plasmonic wave propagation of a prism coupler through optimal grating structure design. |
Journal of Electromagnetc Waves and Application, Vol. 25, No. 5/6, pp. 629-640, 2011 |
| [37]Jae Seok Choi, Jeonghoon Yoo |
Optimal design method for magnetization directions of a permanent magnet array. |
Journal of Magnetism and Magnetic Materials, Vol. 322, Issue 15, pp. 2145-2151, 2010. |
| [36] Hyun-Jun Soh, Jeonghoon Yoo |
Optimal shape design of the brake caliper for the squeal noise reduction considering system instability. |
Proceedings of the Institution of Mechanical Engineerings, Part D: Journal of Automobile Engineering, Vol. 224, pp. 909-925, 2010. |
| [35] Jae Seok Choi, Jeonghoon Yoo, Shinji Nishiwaki, Kazuhiro Izui |
Optimization of Magnetization directions in a three dimensional magnetic structure. |
IEEE Transactions on Magnetics, Vol. 46, No. 6, pp. 1603-1606, 2010. |
| [34] Hyun-Jun Soh, Jeonghoon Yoo |
Grating Coupler Design of an Integrated HAMR Head Light Delivery System using Topology Optimization. |
IEEE Transactions on Magnetics, Vol. 46, No. 6, pp. 1511-1514, 2010. |
| [33] Jae Seok choi, Jeonghoon Yoo |
Optimal design method for magnetization directions of a permanent magnet array. |
Journal of Magnetism and Magnetic Materials, Vol. 322, Issue 15, pp. 2145-2151, 2010. |
| [32] Jae Seok Choi, Jeonghoon Yoo |
Design and application of layered composites with the prescribed magnetic permeability. |
International Journal for Numerical Methods in Engineering, Vol. 82, Issue 1, pp. 1-25, 2010. |
| [31]Junghoon Lee, Jeonghoon Yoo, |
Topology optimization of the permanent magnet type MRI considering the magnetic field homogeneity. |
Journal of Magnetism and magnetic Materials, Vol. 332, Issue 9-12, pp. 1651-1654, 2010. |
| [30] Soonok Park, Jeonghoon Yoo, Jae Seok Choi |
Simultaneous optimal design of the yoke and the coil in the perpendicular magnetic recording head. |
IEEE Transactions on Magnetics, Vol. 45, No. 10, pp. 3668-3671, 2009. |
| [29] Jae Seok Choi, Jeonghoon Yoo, No-Cheol Park |
Small form factor actuator design for camera phone lens systems. |
Microsystem Technologies, Vol. 15, No. 10-11, pp. 1489-1497, 2009. |
| [28] Jeonghoon Yoo, Myung Wook Hyun, Jun Ho Choi, Sungchul Kang, Seung-Jong Kim |
Optimal Design of a Variable Stiffness Joint in a Robot Manipulator using the Response Surface Method. |
Journal of Mechanical Science and Technology, Vol. 23, No. 8, pp. 2236-2243, 2009. |
| [27] Jae Seok Choi, Jeonghoon Yoo |
Design of an eddy current brake system using microstructures . |
IEEE Transactions on Magnetics, Vol. 45, No. 6, pp. 2720-2723, 2009. |
| [26] Soonok Park, Jeonghoon Yoo, Jae Seok Choi |
Optimal shape design of the perpendicular magnetic recording head. |
IEEE Transactions on Magnetics, Vol. 45, No. 5, pp. 2272-2275, 2009. |
| [25] Jae Seok Choi, Jeonghoon Yoo |
Structural toplogy optimization of magnetic actuators using genetic algorithms and on/off sensitivity. |
IEEE Transactions on Magnetics, Vol. 45, No. 5, pp. 2276-2279, 2009. |
| [24] Jae Seok Choi, Jeonghoon Yoo |
Simultaneous structural toplogy optimization of electromagnetic sources and ferromagnetic materials. |
Computer Methods in Applied Mechanics and Engineering, Vol. 198, Issue 27-29, pp. 2111-2121, 2009. |
| [23] Jeonghoon Yoo,Sang-joon Hong, Jae Seok Choi, Yeon June Kang |
Design guide of bolt locations for bolted joint plates considering dynamic characteristics. |
Proceedings of the Institution of Mechnaical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 223, No. 2, pp. 363-375, 2009. |
| [22] Jae Seok Choi, Jeonghoon Yoo |
Design of the Halbach Magnet Array based on Optimization Techniques. |
IEEE Transactions on Magnetics, Vol. 44, No. 10, pp. 2361-2366, 2008. |
| [21] Jae Seok Choi, Jeonghoon Yoo |
Structural Optimization of Ferromagnetic Materials based on the Magnetic Reluctivity for Magnetic Field Problems. |
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issue 49-50, pp. 4193-4206, 2008. |
| [20] Jeonghoon Yoo, Seungjin Yang, Jae Seok Choi |
Optimal Design of an Electromagnetic Coupler to Maximize Force to a Specific Direction. |
IEEE Transactions on Magnetics, Vol. 44, Issue 7, pp. 1737-1742, 2008. |
| [19] Jeonghoon Yoo, Dong-Teak Chung, Myungsoo Park |
Numerical and Experimental Approach for the Optimal Design of a Dual Plate under Ballistic Impact. |
International Journal of Modern Physics B, Vol. 22, Issue 9/11, pp. 1538-1543, 2008. |
| [18] Yong-Sub Yi, Yoon Young Kim, Jae Seok Choi, Jeonghoon Yoo, Dong Jin Lee, Suk Won Lee, Sung Jin Lee |
Dynamic analysis of a linear motion guide having rolling elements for precision positioning devices. |
Journal of Mechanical Science and Technology, Vol. 22, pp. 50-60, 2008. |
| [17] Myung Wook Hyun, Jeonghoon Yoo, Seoung Tack Hwang, Jun Ho Choi, Sungchul Kang, and Seung-Jong Kim |
Optimal Design of a Variable Stiffness Joint Using Permanent Magnets. |
IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2710-2712, 2007. |
| [16] Chul Park, Jeonghoon Yoo, No-Cheol Park, Young-Pil Park, Takeshi Shimano, Shigeo Nakamura |
Design of swing arm type actuators considering thermal and dynamic characteristics. |
Microsystem Technologies, Vol. 13, No. 8-10, 777-796, 2007. |
| [15] Jeonghoon Yoo, Choong-yong Lee |
Topology Optimization of a Swing Arm Type Actuator Using the Response Surface Method. |
Microsystem Technologies, Vol. 13, No. 1, 21-31, 2007. |
| [14] Jae Seok Choi, Jeonghoon Yoo, Sang-Joon Hong, Tae-Hyun Kim, Sung Jin Lee |
Physical Modeling and Characteristics of a Johnsen-Rahbek Type Electrostatic Chuck. |
Key Engineering Materials Journal, Vol. 326-328, pp.1221-1224, 2006. |
| [13] Jeonghoon Yoo |
Topology Optimization in Magnetic Fields.in IUTAM Symposium on Topology Design Optimization of Structures, Machines and Materials, edited by M. P. Bendsoe, N. Olhoff and O. Sigmund |
Solid Mechanics and Its applications Vol. 137, pp.269-276, 2006. |
| [12] Jeonghoon Yoo, Seungjae Min |
Design of Micro-actuators using Compliant Mechanism. |
Key Engineering Materials Journal, Vol. 306-308, pp.1169-1174, 2006. |
| [11] Jeonghoon Yoo, Hyun Jun Soh |
An Optimal Design of Magnetic Actuators Using Topology Optimization and the Response Surface Method. |
Microsystem Technologies, Vol. 11, No. 12, pp.1252-1261, 2005. |
| [10]Myungsoo Park,Jeonghoon Yoo, Dong-Teak Chung |
An optimization of a multi-layered plate under ballistic impact. |
International Journal of Solids and Structures, Vol. 42, No. 1, pp. 123-137, 2005. |
| [9] Jeonghoon Yoo |
Modified Method of Topology Optimization in Magnetic Fields. |
IEEE Transactions on Magnetics, Vol.40, No.4, pp.1796-1802, 2004. |
| [8] Jeonghoon Yoo,Hyeoksoo Hong |
A Modified Density Approach for Topology Optimization in Magnetic Field. |
International Journal of Solids and Structures, Vol. 41, No. 9-10, pp. 2461-2477, 2004. |
| [7] Jeonghoon Yoo,Noboru Kikuchi |
Topology Optimization for Reduction of Vibration Caused by Magnetic Harmonic Excitation. |
IEEE Transactions on Magnetics, Vol.38, No.6, pp.3643-3649, 2002. |
| [6] Jeonghoon Yoo |
Structural optimization in magnetic fields using the homogenization design method. Part II: Reduction of vibration caused by magnetic forces. |
Archives of Computational Methods in Engineering, Vol. 9, No.3, pp.257-282, 2002. |
| [5] Jeonghoon Yoo |
Reduction of Vibration Caused by Magnetic Force in a Switched Reluctance Motor by Topology Optimization. |
Journal of Applied Mechanics - Trans. of ASME, Vol. 69, No. 3, pp.380-387, 2002. |
| [4] Jeonghoon Yoo, Noboru Kikuchi, John L. Volakis |
Structural Optimization in Magnetic Fields Using the Homogenization Design Method - Part I. |
Archives of Computational Methods in Engineering, Vol. 8, No.4, pp.387-406, 2001. |
| [3] Jeonghoon Yoo, Noboru Kikuchi, John L. Volakis |
Structural Optimization in Magnetic Devices by the Homogenization Design Method. |
IEEE Transactions on Magnetics, Vol.36, No.3, pp.574-580, 2000. |
| [2] Jeonghoon Yoo, Noboru Kikuchi |
Topology Optimization in Magnetic Fields Using the Homogenization Design Method. |
International Journal for Numerical Methods in Engineering. Vol.48, Issue 10, pp.1463-1479, 2000. |
| [1] Shinji Nishiwaki, Seungjae Min, Jeonghoon Yoo, Noboru Kikuchi |
Optimal Structural Design Considering Flexibility. |
Computer Methods in Applied Mechanics and Engineering, Vol.190, Issue 34, pp.4457-4504, 2001 |
