국외저널                 국내저널                학회발표(국제)                학회발표(국내)

(73) "Structural Optimization Scheme for Waveguide Design in Microwave Range", Hyundo Shin, Jeonghoon Yoo, The 5th International Conference on Engineering and Applied Sciences, Japan, Jul 20, 2015.

(72) "Structural topological optimization of a 3-D nano-aperture based on the phase field method", Cheol Woong Kim, Hong Kyoung Seong, Heeseung Lim, Jeonghoon Yoo, 6th International Comference on Computational Methods(ICCM 2015), New Zealand, Jul 14, 2015.

(71) "Three-dimensional Light Weight Design of Robot Parts Using the Topology Optimization Method", Kangwon Lee, Jeonghoon Yoo, 11th World Congress of Structural and Multidisciplinary Optimisation, Australia, Jun 7, 2015.

(70) "Structural optimization for cloaking effect using dielectric material based on the phase field method", Namjoon Heo, Jeonghoon Yoo, 11th World Congress of Structural and Multidisciplinary Optimisation, Australia, Jun 7, 2015.

(69) "Shape optimization of a nanoparticle for plasmonic enhancement in a small gap", Hak Yong Lee, Jeonghoon Yoo, 11th World Congress of Structural and Multidisciplinary Optimisation, Australia, Jun 7, 2015.

(68) "Off-axis directional beaming of microwave via tailoring dielectric structure", Hyundo Shin, Jeonghoon Yoo, BIT's 1st Annual World Congress of Smart Materials(WCSM)-2015, Korea, Mar 23, 2015.

(67) "Shape optimization of a nanoparticle to enhance plasmonic effects", Hak Yong Lee, Jeonghoon Yoo, BIT's 1st Annual World Congress of Smart Materials(WCSM)-2015, Korea, Mar 23, 2015.

(66) "Optimal design of infrared reflector for infrared stealth effect based on the phase field method", Namjoon Heo, Jeonghoon Yoo, BIT's 1st Annual World Congress of Smart Materials(WCSM)-2015, Korea, Mar 23, 2015.

(65) "Weight Reduction of the body Weight Support of COWALK using the Topology Optimization Method", Kang Won Lee, Jeonghoon Yoo, International Biomedical Engineering Conference (IBEC) 2014, Korea, Nov 20, 2014.

(64) "Systematic Nanoparticle Shape Design to Enhance Plasmonic Effects", Hak Yong Lee, Hong Kyoung Seong, Jeonghoon Yoo, International Biomedical Engineering Conference (IBEC) 2014, Korea, Nov 20, 2014.

(63) "Structural Design of Two-Dimensional Dielectric Structure to Enhance Off-axis Directional Electromagnetic Wave in a Microwave Range", Hyundo Shin, Dongheok Shin, Jeonghoon Yoo, 8th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, Denmark, Aug 25, 2014.

(62) "Ag Nanoparticel Shape Design in Thin Film Silicon Solar Cells for Broadband Plasmonic Scattering Effect Enhancement", Hak Yong Lee, Jeonghoon Yoo, 8th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, Denmark, Aug 25, 2014.

(61) "Structural design of metallic waveguide device in the microwave range using topological design process", Hyundo Shin, Jeonghoon Yoo, 11th World Congress on Computational Mechanics (WCCM XI), Spain, Jul 20, 2014.

(60) "BLC Derivation of a Stuffed Whipple Shield Based on Numerical Simulations", Byung Jin Son, Jeonghoon Yoo, 11th World Congress on Computational Mechanics (WCCM XI), Spain, Jul 20, 2014.

(59) "Numerical simulation based ballistic limit curve derivation of a stuffed Whipple shield", Byung Jin Son, Jeonghoon Yoo, 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Korea, May 25, 2014.

(58) "Phase field method based optimal design considering thermal and magnetic effects", Hansol Kim, Jeonghoon Yoo, 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Korea, May 25, 2014.

(57) "Nanoparticle shape optimization to enhance the performance of a thin film solar cell", Hak Yong Lee, Jeonghoon Yoo, 2014 AMEE Workshop on Nanomaterials and Nanodevices (NMND2014), HongKong, Apr 26, 2014.

(56) "Nanoparticle shape optimization to enhance the performance of a thin film solar cell", Hak Yong Lee, Jeonghoon Yoo, 2014 AMEE Workshop on Nanomaterials and Nanodevices (NMND2014), HongKong, Apr 26, 2014.

(55) "Reflector Layer Design of a thin film solar cell using topology optimization based on the phase field method", Namjoon Heo, Jeonghoon Yoo, 2014 AMEE Workshop on Nanomaterials and Nanodevices (NMND2014), HongKong, Apr 26, 2014.

(54) "Absorbing Layer Design for Infrared Detectors by Topology Optimization", Hyundo Shin,Dongyeol Lim, Jeonghoon Yoo, 5th Asia Pacific congress on Computational Mechanics, Singapore, Dec 11, 2013.

(53) "Absorbing Layer Design for Infrared Detectors by Topology Optimization", Namjoon Heo, Hyundo Shin,Jaeyeol Lee, Jeonghoon Yoo, 5th Asia Pacific congress on Computational Mechanics, Singapore, Dec 11, 2013.

(52) "Simulation based Ballistic Limit Curve Derivation of an Aluminum Whipple", Byung Jin Son, Jeonghoon Yoo, The 8th International Symposium on Impact Engineering, Japan, Sep 3, 2013.

(51) "Structural optimization of a multi-physics problem considering thermal and magnetic effects.", Soonok Park, Jeonghoon Yoo, Intermag Conference Digest, FG11, Vancouver, Canada, May 7th-11th, 2012.

(50) "Periodic anti-Reflective Layer Design for the Thin Film Solar Cell using the Topology Optimization Procedure", Hyun-Jun Soh, Jeonghoon Yoo, META 12 Conference, Apr. 19-22, 2012, pp. 375-379, Paris, France.

(49) "Topology Optimization of a Magnetic Actuator Considering Multi-physics Effect", Soonok Park, Jeonghoon Yoo, 7th International Conference on Advanced Materials and Devices (ICAMD) 2011, Dec. 7-9, 2011, Jeju, Korea.

(48) "Structural Design for Improving Surface Plasmon Resonance (SPR) Sensing Performance", Hyunjun Soh, Jeonghoon Yoo, Hee Sung Lim, ASIASENSE 2011, Oct. 23-26, 2011, Jeju, Korea.

(47) "Texturing Design for a Light Trapping System using Topology Optimization", Hyunjun Soh, Jeonghoon Yoo, 18th International Conference on the Computation of Electromagnetic Fields (Compumag 2011), 198, July 12-15, 2011, Sydney, Australia.

(46) "Design Optimization of an IPMSM by Topology Optimization based on the Level Set Method", Hyeoksoo Hong, Jeonghoon Yoo, 18th International Conference on the Computation of Electromagnetic Fields (Compumag 2011), 186, July 12-15, 2011, Sydney, Australia.

(45) "Hypervelocity Impact Analysis and Optmal Design Using a Coupled Method of Smoothed Particle Hydrodynamics", Younghoon Kim, Jeonghoon Yoo, Minhyung Lee, Proceedings of 9th World Congress on Structural and Multidisciplinary Optimization, June 13-17, 2011, Shizuoka Japan.

(44) "Topology Optimization Using a Genetic Algorithm and On/Off Method for Patch Antenna Design", Sung Moon Song, Jeonghoon Yoo, Proceedings of 9th World Congress on Structural and Multidisciplinary Optimization, June 13-17, 2011, Shizuoka Japan.

(43) "Design of Surface Texture on Back Reflector of Light Trapping System Using Topology Optimization" Hyunjun Soh,, Jeonghoon Yoo, Proceedings of 9th World Congress on Structural and Multidisciplinary Optimization, June 13-17, 2011, Shizuoka Japan.

(42) “Optimal Shape Design of Magnetic Actuators for Magnetic and Dynamic Characteristic Improvement “, Jeonghoon Yoo, Jaeyeob Jung, International Conference of AUMS (ICAUMS 2010), CT03, p95, December 5-8, 2010, Jeju, Korea.

(41) “Structural Topology Optimization using the Genetic Algorithms for the Improvement of Dynamic and Magnetic Characteristics", Jae Yoeb Jung, Jeonghoon Yoo, Proceedings of the 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM6), June 22-25, 2010, Kyoto, Japan.

(40) “Topology Optimization of Magnetic Actuator Considering the Nonlinear Saturation Effect", Soonok Park, Jeonghoon Yoo, Proceedings of the 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM6), June 22-25, 2010, Kyoto, Japan.

(39) "Topology Optimization in Electromagnetic Fields for Visible/Near Infra-Red Frequency Range", Jeonghoon Yoo, Hyun-Jun Soh, 2nd International Workshops on Advances in Computational Mechanics (IWACOM-II), Yokohama, Japan, March 29th-31st, 2010.

(38) "Optimization of magnetization directions in a three dimensional magnetic system.", Jae Seok Choi, Jeonghoon Yoo, Shinji Nishiwaki, Kazuhiro Izui, 11th Joint MMM-Intermag Conference Digest, GG06, 1619, Washington DC, Jan. 18th-22nd, 2010.

(37) Grating coupler design of an integrated HAMR head light delevery system using topology optimization“, Hyun-Jun Soh, Jeonghoon Yoo, 11th Joint MMM-Intermag Conference Digest, BB04, 298, Washington DC, Jan. 18th-22nd, 2010.

(36) “Simultaneous optimal design of the yoke and the coil of electromagnetic devices", Jeonghoon Yoo, Soonok Park, Jae Seok Choi, 10th US Congress on Computational Mechanics, 1579629, Columbus, Ohio, July 2009.

(35) “Simultaneous optimal design of the yoke and the coil in the perpendicular magnetic recording head", Soonok Park, Jeonghoon Yoo, Jae Seok Choi, IEEE International Magnetic Conference (INTERMAG) 2009, DC07, May 4-8, 2009, Sacramento, US.

(34) "Structural topology optimization of magnetic actuator using genetic algorithms", Jae Seok Choi, Jeonghoon Yoo, Asia-Pacific Data Staorage Conference 08, K03, pp. 100-101, December 15-17, 2008, Jeju, Korea.

(33) "Optimal shape design of the perpendicular magnetic recording head", Soonok Park, Jeonghoon Yoo, Jae Seok Choi, Asia-Pacific Data Staorage Conference 08, J04, pp. 94-95, December 15-17, 2008, Jeju, Korea.

(32) "Dynamic characteristics improvement of the palte spring in 2-axis small sized actuator", Soonok Park, Jeonghoon Yoo, No-Cheol Park, Asia-Pacific Data Staorage Conference 08, P16, pp. 137-138, December 15-17, 2008, Jeju, Korea.

(31) “Design of an eddy current brake system using microstructures", Jae Seok Choi, Jeonghoon Yoo, Asian Magnetic Conference 2008, December 10-13, 2008, Busan, Korea, DD03, p209.

(30) "Topology optimization of the permanent magnet type MRI considering the magnetic field homogeneity", JunghoonLee, Jeonghoon Yoo, Joint European Magnetic Symposia (JEMS) 08, September 14-19, 2008, Dublin, Ireland, BM004.

(29) "Optimal design considering the homogeneity of the magnetic field", Junghoon Lee, Jeonghoon Yoo, Proceedings of 4th Asian Conference on Multibody Dynamics 2008, pp. 696-699, August 20-23, Jeju, Korea.

(28) "Brake noise improvement using complex eigen-value analysis and the optimal design process", Hyun-Jun Soh, Jeonghoon Yoo, Proceedings of 4th Asian Conference on Multibody Dynamics 2008, pp. 550-553, August 20-23, Jeju, Korea.

(27) "Optimal Topology Design of the Magnetic Valve Systems in an Automobile Engine", Hyun-Jun Soh, Soon-Ok Park, Jeonghoon Yoo, Proceedings of the 5th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM5), June 16-19, 2008, Jeju, Korea.

(26) "Topology Optimization based on the Genetic Algorithm Considering the Connectivity of a Structure", Jae Seok Choi, Jeonghoon Yoo, Proceedings of the 5th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM5), June 16-19, 2008, Jeju, Korea.

(25) "Simultaneous Topology Optimization of a Permanent Magnet and a Yoke", Jae Seok Choi, Jeonghoon Yoo, Proceedings of Asian-Pacific Conference on Computational Mechanics 2007, Dec. 3-6, 2007, Kyoto, Japan.

(24) “Finite Element Analysis of the Attractive Force on a Coulomb Type Electrostatic Chuck", Jeonghoon Yoo, Jae-Seok Choi, Sang-Joon Hong, Tae-Hyun Kim, Sung Jin Lee, Proceedings of International Conference on Electrical Machines and Systems 2007, Oct. 8-11, 2007, Seoul, Korea, pp.1371-1375.

(23) "Numerical and Experimental Approach for the Optimal Design of a Dual Plate under Ballistic Impact", Jeonghoon Yoo, Dong-Teak Chung, Myungsoo Park, Abstract book of 6th International Symposium on Impact Engineering, p. 63, paper No. 81, Daejeon, 16. Sept. - 19. Sept. 2007, Korea.

(22) "Small Form Factor (SFF) Actuator Design for Camera Phone Lens Systems", Jae Seok Choi, Jeonghoon Yoo, No-Cheol Park, Proceedings of ASME Information Storage and Processing Systems Conference, pp.205-207, Santa Clara, US, June 18-19, 2007.

(21) "Structural Optimization of a Magnetic Actuator Using a New Interpolation Scheme Based on Magnetic Reluctivity", Jae Seok Choi, Jeonghoon Yoo, Proceedings of 7th World Congress on Structural and Multidisciplinary Optimization, pp. 2018-2024, COEX Seoul, 21 May - 25 May 2007, Korea.

(20) "Topology Optimization of an Electromagnetic Coupler for Maximizing Force of a Specific Direction", Jeonghoon Yoo, Seungjin Yang, Jae Seok Choi, Proceedings of 7th World Congress on Structural and Multidisciplinary Optimization, pp. 1997-2002, COEX Seoul, 21 May - 25 May 2007, Korea.

(19) "Inverse design of magnetic unit-materials for prescribed magnetic properties", Jae Seok Choi and Jeonghoon Yoo, International Conference on Computational Methods, p249, Hiroshima, Japan, April 4-6, 2007.

(18) “A Novel Design of High Responsive Vraible Stiffness Joints for Dependable Manipulator", Seung-kook Yoon, Sungchul Kang, Munsang Kim, Seung-Jong Kim, Myung Wook Hyun, Jeonghoon Yoo, Proceedings of the 3rd Asian Conference on Multibody Dynamics 2006, A00695, Tokyo, Japan, August 1-4, 2006.

(17) “Design of Swing Arm type Actuators considering thermal and dynamic characteristics”, Chul Park, Hyeoksoo Hong, Dong-Ju Lee, Jeonghoon Yoo, No-Cheol Park, Young-Pil Park, Takeshi Shimano, Shigeo Nakamura, ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006), Santa Clara, CA, June 21-23, 2006.

(16) "Topology Optimization of a Structure in Magnetic Fields", Jeonghoon Yoo, Proceedings of topoptSYM2005, IUTAM-Symposium 2005, pp.159-167, Copenhagen, Denmark, Oct. 159-167, 2005.

(15) “Design of Micro-actuators using Compliant Mechanism", Jeonghoon Yoo, Seungjae Min, 6th International Conference on Fracture and Strength of Solids, pp. 1161-1166, Bali, Indonesia, April 4-6, 2005.

(14) "Design of a swing arm type actuator using the compliant mechanism", Jeonghoon Yoo, Seungjae Min, Jongjin Lee, International Workshops on Advances in Computational Mechanics, pp, 112, Tokyo, Japan, 2004.
(13) "Design of a swing arm type actuator using the compliant mechanism", Jeonghoon Yoo, Seungjae Min, Jongjin Lee, International Workshops on Advances in Computational Mechanics, pp, 112, Tokyo, Japan, 2004.
(12) "Optimization Study for the Dual Plate Using Erosion Algorithm", Myungsoo Park, Jeonghoon Yoo, Dong-Taek Chung, Proceeding of the 3rd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical System(CJK-OSM3), pp. 645-650, 2004.
(11) "Design of a swing arm type actuator using the compliant mechanism", Jeonghoon Yoo, Seungjae Min, Jongjin Lee, International Workshops on Advances in Computational Mechanics, pp, 112, Tokyo, Japan, 2004.
(10) "Micro-scale dynamics of a linear motion guide having rolling elements", Yong-sub Yi, Dong-Jin Lee, Yoon Young Kim, Jae Suk Choi, Jeonghoon Yoo, Sung Jin Lee, Suk Won Lee, International Conference on Noise and Vibration Engineering, pp. 67, Leuven, Berlin, September, 2004.
(9) "Optimal Design of Magnetic Actuators for Maximizing Force", Jeonghoon Yoo, Hyun-Jun Soh, 6th World Congress of Computational Mechanics, p25, Beijing, China, September, 2004.

(8) "Dynamic Characteristics of a Linear Motion Guide Supported by Rolling Ball Bearings", Jae Seok Choi, Jeonghoon Yoo, Yoon Young Kim, Dong Jin Lee, Suk Won Lee, Proceesings of the 3rd International Conference on Advances in Structural Engineering and Mechanics, pp. 1536-1547, Seoul, Korea, September, 2004.

(7) "The Modeling Method of Bolted-Joints with Linear Spring Considering Dynamic Characteristics, Sang-joon Hong, Jeonghoon Yoo, Yoon Young Kim, Dong Jin Lee, Suk Won Lee, Proceesings of the 3rd International Conference on Advances in Structural Engineering and Mechanics, pp. 1514-1525, Seoul, Korea, September, 2004.

(6) "An Optimization of Multi-Layered Plate Under High Velocity Impact", Myungsoo Park, Jeonghoon Yoo, Dong-Teak Chung, 5th International Symposium on Impact Engineering, University of Cambridge, UK, July, 2004.

(5) "Structural Optimization in Magnetic Fields : Comparisons of Results by the Homogenization Design Method and Density Approach", Jeonghoon Yoo, The Workshop on Critical Issues of Topology Optimization Design, 2003.

(4) "Comparison of structural topology optimization methods in magnetic fields", Jeonghoon Yoo, Proceedings of the 2nd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM2), pp.269-274, 2002.

(3) "Comparison of structural topology optimization methods in magnetic fields", Jeonghoon Yoo, Proceedings of the 2nd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM2), pp.269-274, 2002.

(2) "Analysis and optimization of a plate having multi-layered structure of materials under high-velocity impact", Deok-Hyun Yoon, Dong-Teak Chung and Jeonghoon Yoo, Proceedings of the 2nd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM2), pp.207-212, 2002.

(1) "Reduction of vibration caused by the periodic magnetic force using the homogenization design method", Jeonghoon Yoo and Noboru Kikuchi, 6th US Congress on Computational Mechanics, Dearborn, Michigan, August 2001.